{"id":32244,"date":"2026-08-27T02:53:24","date_gmt":"2026-08-27T06:53:24","guid":{"rendered":"https:\/\/bagslebon.com\/?p=32244"},"modified":"2026-08-27T02:53:24","modified_gmt":"2026-08-27T06:53:24","slug":"how-to-write-bag-sample-feedback-that-a-factory-can-act-on","status":"publish","type":"post","link":"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/","title":{"rendered":"How to Write Bag Sample Feedback That a Factory Can Act On"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Useful bag sample feedback identifies the exact location, shows the observed condition, states the required result and records how the correction will be verified. \u201cImprove the shape,\u201d \u201cmake the zipper smoother\u201d or \u201cmove the pocket slightly\u201d leaves the sample room to choose the cause and the solution.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Number every issue. Use an overall photograph plus a close-up, connect the comment to a measurement point or component ID, and separate defects from design changes and open questions. Assign priority and approval status. After the factory responds, update the tech pack rather than allowing the feedback sheet to become a parallel specification.<\/p>\n\n\n\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_86 counter-hierarchy ez-toc-counter ez-toc-light-blue ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1 ' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Inspect_the_sample_before_writing_corrections\" >Inspect the sample before writing corrections<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Give_every_issue_one_stable_comment_ID\" >Give every issue one stable comment ID<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Write_the_observed_condition_before_the_requested_action\" >Write the observed condition before the requested action<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Replace_subjective_words_with_decision_criteria\" >Replace subjective words with decision criteria<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Use_photographs_that_answer_a_manufacturing_question\" >Use photographs that answer a manufacturing question<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Separate_defect_design_change_and_open_question\" >Separate defect, design change and open question<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Add_priority_without_confusing_it_with_approval\" >Add priority without confusing it with approval<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Ask_the_factory_to_respond_to_every_comment\" >Ask the factory to respond to every comment<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Review_dependencies_before_approving_a_correction\" >Review dependencies before approving a correction<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Use_one_feedback-to-release_workflow\" >Use one feedback-to-release workflow<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Do_not_let_sample_feedback_become_a_parallel_tech_pack\" >Do not let sample feedback become a parallel tech pack<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Feedback_release_checklist\" >Feedback release checklist<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#What_buyers_should_send\" >What buyers should send<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/bagslebon.com\/fr\/how-to-write-bag-sample-feedback-that-a-factory-can-act-on\/#Next_action\" >Next action<\/a><\/li><\/ul><\/nav><\/div>\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Inspect_the_sample_before_writing_corrections\"><\/span>Inspect the sample before writing corrections<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Review the sample in a consistent condition:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>confirm product code, color and sample stage;<\/li><li>identify the tech-pack and BOM revisions used;<\/li><li>record every declared substitution or exception;<\/li><li>allow for reasonable recovery from packing or folding;<\/li><li>set zippers, straps and closures consistently;<\/li><li>check the intended contents and use sequence;<\/li><li>measure with the specified method;<\/li><li>compare materials and components with approved references.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Without this first step, a buyer can criticize an attribute the sample was never intended to represent. A prototype made with a declared substitute should not be rejected for failing to match an unrepresented final color. It may still be rejected if the substitution makes the construction or functional result impossible to judge.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Give_every_issue_one_stable_comment_ID\"><\/span>Give every issue one stable comment ID<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Use a simple sequence such as C01, C02 and C03. Put the same ID on the photograph, comment log, revised drawing and factory response. Keep one decision per ID.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A comment that combines three actions creates uncertain closure. The factory may fix two and mark the whole line complete. Separate comments also make it easier to identify which change affects cost, pattern, material, tooling or another page.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/bagslebon.com\/wp-content\/uploads\/2026\/08\/actionable-bag-sample-feedback-anatomy.png\" alt=\"Anatomy of actionable bag sample feedback\"\/><figcaption class=\"wp-element-caption\">One comment ID should connect the location, evidence, required result, priority and verification method.<\/figcaption><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Write_the_observed_condition_before_the_requested_action\"><\/span>Write the observed condition before the requested action<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Describe what you can verify:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>\u201cFront pocket opening measures differently from POM P07 using the released method.\u201d<\/li><li>\u201cLeft strap attachment is visibly lower than the right when measured from the top binding seam.\u201d<\/li><li>\u201cLining enters the zipper path at the right-hand corner during operation.\u201d<\/li><li>\u201cLogo center does not align with the centerline shown on artwork page A03.\u201d<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Then state the required result. Avoid diagnosing the manufacturing cause unless it has been confirmed. If you write \u201creduce sewing tension\u201d but the resistance comes from seam bulk or lining clearance, the sample room may follow your instruction and leave the real problem unchanged.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Ask the factory to investigate and propose the construction correction when the cause is uncertain.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Replace_subjective_words_with_decision_criteria\"><\/span>Replace subjective words with decision criteria<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Subjective language can express intent, but it needs a controllable explanation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Instead of \u201cmake it more premium,\u201d identify the relevant attribute: cleaner standing shape, less visible seam bulk, a different hardware finish, more consistent topstitching or a changed edge treatment.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Instead of \u201cmake the pocket easier to use,\u201d define the user action and the problem: opening too narrow for the intended item, zipper path obstructed, hand access restricted by the opening position or contents difficult to retain.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Instead of \u201cmove it slightly,\u201d state the current and required landmark or measurement.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/bagslebon.com\/wp-content\/uploads\/2026\/08\/vague-vs-actionable-bag-feedback.png\" alt=\"Vague and actionable bag sample feedback compared\"\/><figcaption class=\"wp-element-caption\">Actionable feedback describes the evidence and required result without forcing the factory to guess what \u201cbetter\u201d means.<\/figcaption><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Use_photographs_that_answer_a_manufacturing_question\"><\/span>Use photographs that answer a manufacturing question<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For each visual issue, provide:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>one overall view showing orientation and location;<\/li><li>one close-up showing the condition;<\/li><li>an arrow, circle or highlighted area;<\/li><li>comment ID and relevant point or component ID;<\/li><li>a scale or reference when size is disputed;<\/li><li>the same closure and filling state used in the measurement method.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Photographs are weak evidence for precise color unless lighting, camera and reference conditions are controlled. Use approved swatches, lab approvals or physical component references for color decisions where appropriate. A photo can show where the mismatch appears, but not always prove the magnitude of the color difference.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Separate_defect_design_change_and_open_question\"><\/span>Separate defect, design change and open question<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">These require different supplier responses:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Nonconformity:<\/strong> the sample does not meet the released requirement. Correct and verify against the existing specification.<\/li><li><strong>Buyer design change:<\/strong> the sample may meet the file, but the buyer wants a different result. Review impact, update documents and verify the revision.<\/li><li><strong>Open requirement:<\/strong> the tech pack did not define the attribute. The team must choose and record the requirement before judging conformity.<\/li><li><strong>Factory proposal:<\/strong> the supplier suggests a different construction, material or component. The buyer must approve or reject it before use.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Calling every issue a defect hides specification gaps and can create unproductive arguments. Calling every issue a design change can hide poor execution. The released requirement and sample record determine the category.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Add_priority_without_confusing_it_with_approval\"><\/span>Add priority without confusing it with approval<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Priority tells the team what must be resolved first. Status tells the team whether the decision is approved.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A practical priority system can distinguish:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>critical to safety, regulatory requirement or essential function;<\/li><li>must fix before the next approval stage;<\/li><li>should improve if the proposed solution is acceptable;<\/li><li>observation or future option.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Do not use priority labels as statistical defect classifications unless the project has defined those criteria. The purpose during development is to sequence decisions and prevent a low-impact appearance preference from delaying a functional correction.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Ask_the_factory_to_respond_to_every_comment\"><\/span>Ask the factory to respond to every comment<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The supplier response should state:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>whether the issue is understood;<\/li><li>likely or confirmed cause;<\/li><li>proposed correction;<\/li><li>affected documents or BOM items;<\/li><li>cost, sourcing, tooling or schedule impact where relevant;<\/li><li>verification method;<\/li><li>whether a full sample, partial mock-up, component approval or updated document is proposed;<\/li><li>responsible person and status.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">\u201cNoted\u201d is not a manufacturing response. It confirms receipt, not understanding or implementation.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Review_dependencies_before_approving_a_correction\"><\/span>Review dependencies before approving a correction<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">One requested change can affect other features. Moving a pocket may conflict with reinforcement or an internal divider. Increasing foam can reduce device clearance and add seam bulk. Changing webbing width may require new adjusters and attachment geometry. Moving a logo can affect pocket sewing access or reinforcement.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Ask the factory to identify these dependencies. The buyer should decide the trade-off before the next sample, not discover it after the correction has been built.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Use_one_feedback-to-release_workflow\"><\/span>Use one feedback-to-release workflow<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The process should be visible:<\/p>\n\n\n\n<ol class=\"wp-block-list\"><li>Inspect against the correct revision and sample purpose.<\/li><li>Record one issue per comment ID.<\/li><li>Attach evidence and required result.<\/li><li>Classify issue type and priority.<\/li><li>Receive the factory\u2019s cause, proposal and impact response.<\/li><li>Approve, reject or revise the action.<\/li><li>Update every affected tech-pack page.<\/li><li>Verify the result on identified evidence.<\/li><li>Close the comment or carry it forward explicitly.<\/li><\/ol>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/bagslebon.com\/wp-content\/uploads\/2026\/08\/bag-sample-comment-workflow.png\" alt=\"Workflow from bag sample comment to controlled release\"\/><figcaption class=\"wp-element-caption\">The feedback sheet starts the correction. The updated product specification controls the next sample and bulk production.<\/figcaption><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Do_not_let_sample_feedback_become_a_parallel_tech_pack\"><\/span>Do not let sample feedback become a parallel tech pack<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">After several rounds, the comment file may contain the only current instructions. This forces the factory to combine an old drawing with a newer PDF and later chat messages.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Approved changes must return to the drawing, measurement sheet, BOM, artwork or packaging page they affect. The article on <a href=\"https:\/\/bagslebon.com\/how-to-control-tech-pack-revisions-during-bag-sampling\/\">controlling tech-pack revisions during bag sampling<\/a> explains how to identify the new release and withdraw superseded files.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Use <a href=\"https:\/\/bagslebon.com\/how-to-define-finished-bag-dimensions-in-a-tech-pack\/\">finished-bag measurement methods<\/a> for dimensional comments. For stage-specific approval, see <a href=\"https:\/\/bagslebon.com\/prototype-vs-pre-production-sample\/\">prototype versus pre-production sample<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Feedback_release_checklist\"><\/span>Feedback release checklist<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Before sending the report, confirm:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>product, color, sample and document revisions are identified;<\/li><li>every comment has one ID and one primary decision;<\/li><li>location is visible on an overall view;<\/li><li>evidence is shown in a close-up or measurement;<\/li><li>observed condition and required result are separated;<\/li><li>issue type and priority are stated;<\/li><li>dependencies and impact questions are included;<\/li><li>open items are not presented as approvals;<\/li><li>the factory must respond to every comment;<\/li><li>verification evidence is defined;<\/li><li>approved changes will update the tech pack;<\/li><li>bulk authorization remains separate.<\/li><\/ul>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/bagslebon.com\/wp-content\/uploads\/2026\/08\/bag-sample-feedback-release-checklist.png\" alt=\"Bag sample feedback release checklist\"\/><figcaption class=\"wp-element-caption\">A clear report lets the sample room act while preserving the buyer\u2019s approval boundary.<\/figcaption><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"What_buyers_should_send\"><\/span>What buyers should send<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Send the physical sample identification, current tech pack, BOM and artwork versions, annotated photographs, measurement r\u00e9sultats, required changes, open questions and desired decision date. If a reference image is involved, state which attributes should be copied and which are only visual context. The guide on <a href=\"https:\/\/bagslebon.com\/why-a-bag-sample-does-not-match-the-reference-image\/\">why a bag sample may not match a reference image<\/a> provides a cause-based diagnostic sequence.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The broader <a href=\"https:\/\/bagslebon.com\/bag-sampling-quality-control-process\/\">bag sampling and quality-control process<\/a> shows where this feedback belongs before pre-production release.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><span class=\"ez-toc-section\" id=\"Next_action\"><\/span>Next action<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">If your current feedback contains phrases such as \u201cmake better,\u201d \u201csame as photo\u201d or \u201cadjust slightly,\u201d rewrite each comment into location, evidence, required result and verification. Send the sample report and current tech pack through the <a href=\"https:\/\/bagslebon.com\/contact\/#quote-form\">product inquiry form<\/a> if the manufacturing questions need to be identified before another prototype is ordered.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Technical references:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><a href=\"https:\/\/www.iso.org\/files\/live\/sites\/isoorg\/files\/archive\/pdf\/en\/documented_information.pdf\" rel=\"noopener\">ISO guidance on documented information, design reviews and authorized changes<\/a><\/li><li><a href=\"https:\/\/help.sap.com\/docs\/SAP_S4HANA_ON-PREMISE\/80ba6f1ebc664faaa6df32575c640582\/e824bd534f22b44ce10000000a174cb4.html\" rel=\"noopener\">SAP guidance on engineering change management and revision levels<\/a><\/li><li><a href=\"https:\/\/asq.org\/quality-resources\/supplier-quality\" rel=\"noopener\">ASQ supplier-quality guidance<\/a><\/li><\/ul>\n\n","protected":false},"excerpt":{"rendered":"<p>Useful bag sample feedback identifies the exact location, shows the observed condition, states the required result and records how the correction will be verified. \u201cImprove the shape,\u201d \u201cmake the zipper smoother\u201d or \u201cmove the pocket slightly\u201d leaves the sample room to choose the cause and the solution. Number every issue&#8230;.<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-32244","post","type-post","status-publish","format-standard","hentry","category-blogs"],"translation":{"provider":"WPGlobus","version":"3.0.5","language":"fr","enabled_languages":["en","ar","zh","nl","fr","de","hi","id","it","ja","ko","pt","ru","es","th","tr","vi"],"languages":{"en":{"title":true,"content":true,"excerpt":false},"ar":{"title":false,"content":false,"excerpt":false},"zh":{"title":false,"content":false,"excerpt":false},"nl":{"title":false,"content":false,"excerpt":false},"fr":{"title":false,"content":false,"excerpt":false},"de":{"title":false,"content":false,"excerpt":false},"hi":{"title":false,"content":false,"excerpt":false},"id":{"title":false,"content":false,"excerpt":false},"it":{"title":false,"content":false,"excerpt":false},"ja":{"title":false,"content":false,"excerpt":false},"ko":{"title":false,"content":false,"excerpt":false},"pt":{"title":false,"content":false,"excerpt":false},"ru":{"title":false,"content":false,"excerpt":false},"es":{"title":false,"content":false,"excerpt":false},"th":{"title":false,"content":false,"excerpt":false},"tr":{"title":false,"content":false,"excerpt":false},"vi":{"title":false,"content":false,"excerpt":false}}},"_links":{"self":[{"href":"https:\/\/bagslebon.com\/fr\/wp-json\/wp\/v2\/posts\/32244","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/bagslebon.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/bagslebon.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/bagslebon.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/bagslebon.com\/fr\/wp-json\/wp\/v2\/comments?post=32244"}],"version-history":[{"count":1,"href":"https:\/\/bagslebon.com\/fr\/wp-json\/wp\/v2\/posts\/32244\/revisions"}],"predecessor-version":[{"id":32245,"href":"https:\/\/bagslebon.com\/fr\/wp-json\/wp\/v2\/posts\/32244\/revisions\/32245"}],"wp:attachment":[{"href":"https:\/\/bagslebon.com\/fr\/wp-json\/wp\/v2\/media?parent=32244"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/bagslebon.com\/fr\/wp-json\/wp\/v2\/categories?post=32244"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/bagslebon.com\/fr\/wp-json\/wp\/v2\/tags?post=32244"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}