Angled-pocket Briefcase BL-BR-623
Angled-pocket Briefcase BL-BR-623: Slim angled zipper at one side of the front panel.
Die Aufteilung von Aktentaschen sollte anhand von Dokumenten, Laptop und Arbeitszubehör verglichen werden. Prüfen Sie die Öffnung, die Griffposition, die Schultergurtbefestigungen und die Trennung der gezeigten Fächer. Bestätigen Sie die benötigten Geräte- und Dokumentenmaße; eine geschäftliche Außenoptik belegt weder die Eignung für einen Laptop noch eine bestimmte Schutzleistung.
Alle anzeigen 42 Ergebnisse


Angled-pocket Briefcase BL-BR-623: Slim angled zipper at one side of the front panel.


Buckle-flap Briefcase BL-BR-232: Twin strap tabs close the front flap over two lower pockets.


Contrast-base Briefcase BL-BR-828: Broad contrast strip runs along the entire bottom edge.


Contrast-flap Briefcase BL-BR-768: Broad contrast-trim flap covers the upper front pocket.


Contrast-handle Briefcase BL-BR-339: Contrast webbing handles and a horizontal rear band.


Contrast-trim Briefcase BL-BR-501: Contrast piping outlines parallel zip compartments.


Double-zip Briefcase BL-BR-312: Two long horizontal zipper lines across the front.


Double-zip Briefcase BL-BR-776: Parallel front zip openings below the short handles.


Flap Briefcase BL-BR-541: Front buckle tab below the flap and rear horizontal zipper.


Flap Briefcase BL-BR-757: Single buckle tab at the edge of the horizontal flap.


Flap Messenger Bag BL-BR-304: Full-width curved flap with a simple plain front.


Flap Messenger Briefcase BL-BR-364: Two lower buckle tabs beneath a stitched front flap.


Flap-pocket Briefcase BL-BR-212: Contrast edge under the broad front pocket flap.


Front-pocket Briefcase BL-BR-356: Raised rounded front organizer pocket.


Front-pocket Briefcase BL-BR-619: Long horizontal zip across the front organizer panel.


Front-pocket Briefcase BL-BR-754: Broad front panel with a horizontal zipper near its upper edge.


A rigid attache-style case with a framed rectangular shell, top carry handle, top latches and a detachable shoulder strap. Its structured construction is visibly different from a soft polyester laptop briefcase.


Lock-flap Briefcase BL-BR-573: Curved lower flap edge meets a central lock.


Lock-flap Document Case BL-BR-666: Accordion side gussets beneath a full-width curved flap.


Multi-pocket Briefcase BL-BR-455: Layered front compartments with horizontal zip tracks.


Panel Briefcase BL-BR-243: Two slim vertical strips run down the front.


Panel Briefcase BL-BR-303: Narrow stitched panel borders the plain front face.


Panel Briefcase BL-BR-601: Two long stitched handle tabs divide the front into panels.


Panel Briefcase BL-BR-843: Asymmetric front panel seam near the left edge.


Rectangular Briefcase BL-BR-125: Plain rectangular front with a padded section on the shoulder strap.


Rounded Zip Briefcase BL-BR-529: Curved top corners and a narrow horizontal front zipper.


Rounded-pocket Briefcase BL-BR-513: Front zip pocket has a broad curved top edge.


Rounded-pocket Briefcase BL-BR-774: Raised curved organizer pocket dominates the front.


Slim Laptop Sleeve with Front Pocket BL-CB-090: A slim zippered laptop sleeve with a padded main compartment and an open front pocket.


Slim Zip Briefcase BL-BR-698: Wide flat front pocket under twin webbing handles.


Textured-panel Briefcase BL-BR-410: Rectangular tile-like surface pattern across the body.


Trapezoid Briefcase BL-BR-549: Body widens toward the base with narrow contrast accents.


Travel Briefcase BL-BP-861: Horizontal band crosses the lower front.

Twin-Pocket Briefcase BL-BP-533: A horizontal blue body has two rectangular front zip pockets, paired top handles and a detachable shoulder strap.


Two-tone Flap Briefcase BL-BR-422: Contrasting flap and base around the broad middle panel.


Vertical Carry Briefcase BL-BR-136: Tall front pocket with a central vertical seam.


Vertical Flap Messenger BL-BR-958: Long rectangular flap with gently rounded bottom corners.


Vertical Messenger Bag BL-BR-109: Tall flat flap on one side and upper zip pocket on the other.


Vertical Organizer Bag BL-CB-662: Central vertical band divides the two front panels.


Vertical-panel Briefcase BL-BR-835: Two angled stitched lines divide the front pocket.


Zip Briefcase BL-BR-113: Wide shallow front zip pocket under twin carry handles.


Zip Briefcase BL-BR-234: Narrow central front pocket between vertical stitched panels.
Briefcases for OEM / ODM Projects. Review reference styles, Materialien, logo options, and construction details for B2B sourcing. Use product pages as starting points for custom material, color, logo, Verpackung, and Menge discussions. Mindestmenge: 200 Stück.
Review these guides when comparing bag Materialien, logo methods, MOQ, and OEM / ODM Anfrage details.
Copyright © 2026 LEBON Taschenfabrik.