Angled-pocket Briefcase BL-BR-623
Angled-pocket Briefcase BL-BR-623: Slim angled zipper at one side of the front panel.
Briefcase layouts should be compared around documents, a laptop and work accessories. Review the opening, handle placement, shoulder-strap fittings and the separation of the shown compartments. Confirm the device and document sizes needed; a business-style exterior does not establish laptop fit or protective performance.
Showing all 42 results


Angled-pocket Briefcase BL-BR-623: Slim angled zipper at one side of the front panel.


Buckle-flap Briefcase BL-BR-232: Twin strap tabs close the front flap over two lower pockets.


Contrast-base Briefcase BL-BR-828: Broad contrast strip runs along the entire bottom edge.


Contrast-flap Briefcase BL-BR-768: Broad contrast-trim flap covers the upper front pocket.


Contrast-handle Briefcase BL-BR-339: Contrast webbing handles and a horizontal rear band.


Contrast-trim Briefcase BL-BR-501: Contrast piping outlines parallel zip compartments.


Double-zip Briefcase BL-BR-312: Two long horizontal zipper lines across the front.


Double-zip Briefcase BL-BR-776: Parallel front zip openings below the short handles.


Flap Briefcase BL-BR-541: Front buckle tab below the flap and rear horizontal zipper.


Flap Briefcase BL-BR-757: Single buckle tab at the edge of the horizontal flap.


Flap Messenger Bag BL-BR-304: Full-width curved flap with a simple plain front.


Flap Messenger Briefcase BL-BR-364: Two lower buckle tabs beneath a stitched front flap.


Flap-pocket Briefcase BL-BR-212: Contrast edge under the broad front pocket flap.


Front-pocket Briefcase BL-BR-356: Raised rounded front organizer pocket.


Front-pocket Briefcase BL-BR-619: Long horizontal zip across the front organizer panel.


Front-pocket Briefcase BL-BR-754: Broad front panel with a horizontal zipper near its upper edge.


A rigid attache-style case with a framed rectangular shell, top carry handle, top latches and a detachable shoulder strap. Its structured construction is visibly different from a soft polyester laptop briefcase.


Lock-flap Briefcase BL-BR-573: Curved lower flap edge meets a central lock.


Lock-flap Document Case BL-BR-666: Accordion side gussets beneath a full-width curved flap.


Multi-pocket Briefcase BL-BR-455: Layered front compartments with horizontal zip tracks.


Panel Briefcase BL-BR-243: Two slim vertical strips run down the front.


Panel Briefcase BL-BR-303: Narrow stitched panel borders the plain front face.


Panel Briefcase BL-BR-601: Two long stitched handle tabs divide the front into panels.


Panel Briefcase BL-BR-843: Asymmetric front panel seam near the left edge.


Rectangular Briefcase BL-BR-125: Plain rectangular front with a padded section on the shoulder strap.


Rounded Zip Briefcase BL-BR-529: Curved top corners and a narrow horizontal front zipper.


Rounded-pocket Briefcase BL-BR-513: Front zip pocket has a broad curved top edge.


Rounded-pocket Briefcase BL-BR-774: Raised curved organizer pocket dominates the front.


Slim Laptop Sleeve with Front Pocket BL-CB-090: A slim zippered laptop sleeve with a padded main compartment and an open front pocket.


Slim Zip Briefcase BL-BR-698: Wide flat front pocket under twin webbing handles.


Textured-panel Briefcase BL-BR-410: Rectangular tile-like surface pattern across the body.


Trapezoid Briefcase BL-BR-549: Body widens toward the base with narrow contrast accents.


Travel Briefcase BL-BP-861: Horizontal band crosses the lower front.

Twin-Pocket Briefcase BL-BP-533: A horizontal blue body has two rectangular front zip pockets, paired top handles and a detachable shoulder strap.


Two-tone Flap Briefcase BL-BR-422: Contrasting flap and base around the broad middle panel.


Vertical Carry Briefcase BL-BR-136: Tall front pocket with a central vertical seam.


Vertical Flap Messenger BL-BR-958: Long rectangular flap with gently rounded bottom corners.


Vertical Messenger Bag BL-BR-109: Tall flat flap on one side and upper zip pocket on the other.


Vertical Organizer Bag BL-CB-662: Central vertical band divides the two front panels.


Vertical-panel Briefcase BL-BR-835: Two angled stitched lines divide the front pocket.


Zip Briefcase BL-BR-113: Wide shallow front zip pocket under twin carry handles.


Zip Briefcase BL-BR-234: Narrow central front pocket between vertical stitched panels.
Briefcases for OEM / ODM Projects. Review reference styles, materials, logo options, and construction details for B2B sourcing. Use product pages as starting points for custom material, color, logo, packaging, and quantity discussions. MOQ: 200 pcs.
Review these guides when comparing bag materials, logo methods, MOQ, and OEM / ODM inquiry details.
Before requesting a quotation, review our guides to select materials, compare logo methods, and plan MOQ and packaging.
Copyright © 2026 LEBON Bags Factory.